Numerical investigations of stress concentration in reinforcement steel structure by composite overlays
Authors:
- Bogdan Szybiński,
- Mateusz Wygoda
Abstract
The stress concentration observed in the vicinity of cut-outs and holes in structural elements significantly influences the fatigue endurance of machines subjected to cyclic loads. Numerous studies have been made so far to improve this situation and increase the structure life-time. Several design recommendations have also been worked out to avoid the problem of premature failure. The proposed paper illustrates the influence of the composite overlays applied around the cut-outs made in flat steel constructional elements subjected to axial tension. The detailed study concerns the reinforcement made from the FRP (fiber reinforcement polymer) composite applied around the notches. Two types of composite materials were used, namely: TVR 380 M12/R-glass (glass fibers embedded in epoxy resin matrix) and AS4D/9310 (carbon fibers embedded in epoxy resin matrix). In the first step, the detailed numerical studies (finite element analysis) were performed for the steel samples (with no overlays added) with cut-outs made in the form of circle, square and triangle hole (the last two with rounded corners). The results of these studies were compared with the existing analytical solutions with respect to the stress concentration factors (SCF) estimation. The relatively good conformity was observed when using dense meshes of finite elements placed around the void vicinity. In the next step, the composite overlays were applied around cut-outs and their influence on the stress concentration was investigated. The influence of the fiber orientation, numbers of layers, sizes of the composite overlay used were considered. It was proved that the application of composite overlays evidently decreases the stress concentration around the notches.
- Record ID
- CUTe49d835668e445649438ce65fa19c13d
- Publication categories
- ;
- Author
- Journal series
- Journal of KONES, ISSN 1231-4005, e-ISSN 2354-0133, Quarterly
- Issue year
- 2019
- Vol
- 26
- No
- 4
- Pages
- 249-256
- Other elements of collation
- rys.; tab.; wykr.; Bibliografia (na s.) - 256; Bibliografia (liczba pozycji) - 19; Oznaczenie streszczenia - Abstr.; Numeracja w czasopiśmie - Vol. 26, No. 4
- Keywords in English
- plate, hole, cut-out, stress concentration, FRP composite, reinforcement, FEM
- DOI
- DOI:10.2478/kones-2019-0115 Opening in a new tab
- Language
- eng (en) English
- Score (nominal)
- 5
- Uniform Resource Identifier
- https://cris.pk.edu.pl/info/article/CUTe49d835668e445649438ce65fa19c13d/
- URN
urn:pkr-prod:CUTe49d835668e445649438ce65fa19c13d
* presented citation count is obtained through Internet information analysis, and it is close to the number calculated by the Publish or PerishOpening in a new tab system.